Still a Stunner
With a streamlined body and 280hp inline-6 turbocharged engine rumored to have been developed for racing, the full size Nissan Skyline GT-R (R32) caused quite a stir after its release in August 1989, and is set to do so again in 1/10 drift car form! This R/C model assembly kit recreates the R32 form using a polycarbonate body, with separate molded parts to recreate side mirrors and wing. The model is based upon the TT-02D, drift spec version of the TT-02 chassis.
【 Adaptable & Balanced TT-02 Chassis Drift Version 】
Enjoy the thrill of drifting with this specially tuned drift spec version of the TT-02 chassis. The chassis also features drift spec parts such as 24mm width drift tires (paired with stylish matte-finish metal-plated wheels), and CVA shock units on the 4-wheel double wishbone suspension. Full ball bearings, an aluminum motor heat sink, and a sport-tuned motor come as standard. Of course, the chassis retains the original TT-02's excellent drivability, ease of maintenance, and adaptability.
【 Specifications 】
●Length: 452mm, Width: 187mm, Height: 132mm
●Wheelbase: 257mm
●Tire Width/Diameter (Front & Rear): 24/63mm
●Bathtub-type Frame
●Shaft Driven 4WD
●Front/Rear 4-Bevel Resin Differentials
●3-Piece Steering Tie-Rod
●4-Wheel Double Wishbone Suspension
●Front/Rear CVA Oil Shocks
●Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion)
●Type 540 Sport-Tuned Motor
●Full Ball Bearings
●Electronic Speed Controller (ESC) is sold separately.
【 Separately Required Items 】
●2-Channel R/C Unit with ESC
●Battery Pack & Charger
●R6/AA/UM3 batteries for transmitter
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
With a streamlined body and 280hp inline-6 turbocharged engine rumored to have been developed for racing, the full size Nissan Skyline GT-R (R32) caused quite a stir after its release in August 1989, and is set to do so again in 1/10 drift car form! This R/C model assembly kit recreates the R32 form using a polycarbonate body, with separate molded parts to recreate side mirrors and wing. The model is based upon the TT-02D, drift spec version of the TT-02 chassis.
【 Adaptable & Balanced TT-02 Chassis Drift Version 】
Enjoy the thrill of drifting with this specially tuned drift spec version of the TT-02 chassis. The chassis also features drift spec parts such as 24mm width drift tires (paired with stylish matte-finish metal-plated wheels), and CVA shock units on the 4-wheel double wishbone suspension. Full ball bearings, an aluminum motor heat sink, and a sport-tuned motor come as standard. Of course, the chassis retains the original TT-02's excellent drivability, ease of maintenance, and adaptability.
【 Specifications 】
●Length: 452mm, Width: 187mm, Height: 132mm
●Wheelbase: 257mm
●Tire Width/Diameter (Front & Rear): 24/63mm
●Bathtub-type Frame
●Shaft Driven 4WD
●Front/Rear 4-Bevel Resin Differentials
●3-Piece Steering Tie-Rod
●4-Wheel Double Wishbone Suspension
●Front/Rear CVA Oil Shocks
●Gear Ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinion)
●Type 540 Sport-Tuned Motor
●Full Ball Bearings
●Electronic Speed Controller (ESC) is sold separately.
【 Separately Required Items 】
●2-Channel R/C Unit with ESC
●Battery Pack & Charger
●R6/AA/UM3 batteries for transmitter