Takes any Surface in its Stride!
The TRF211XM chassis is a 2WD buggy that was born to race at the top level! Its lightweight and durable resin lower deck was specially produced to offer a highly-balanced blend of rigidity and flexibility that suits it to any surface. Rear rigidity is further enhanced by fastening the rear stiffener to the carbon-fiber battery stiffener, while big bore aeration dampers cushion the 4-wheel double wishbone suspension. Aluminum gearbox can be fitted with ball or gear diff units to further adapt the chassis to the surface.
*denotes parts designed specifically for the TRF211XM chassis.
【 Specifications 】
●Chassis Length: 402mm, Width: 236mm (when fitted with separately sold wings and wheels/tires)
●Wheelbase: 285mm
●Resin Lower Deck
●Rear-Mounted Motor, Rear-Wheel Drive
●Gear Differential Unit or Ball Differential Gear
●3-Piece Steering Tie Rod
●4-Wheel Independent Double Wishbone Suspension
●Big Bore Aeration Dampers
●Gear Ratio = 8.56:1 (8.56 - 9.34 ratios possible using separately sold gears) ●Includes Body & Rear Wing
●Requires Motor and Electronic Speed Controller (Sold Separately)
【 Separately Required Items 】
●Type 540 Motor (excluding standard Type 540, 540-J, Sport-Tuned and Torque-Tuned motors)
●Tires (Recommended: Items 54185, 54186)
●Wheels (Recommended: Item 51414 (Front), Item 51321 (Rear))
●2-channel R/C system with ESC
●Batteries for transmitter
●Battery Pack and Charger
※Compatible with standard type battery pack when using with low-profile servo.
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
The TRF211XM chassis is a 2WD buggy that was born to race at the top level! Its lightweight and durable resin lower deck was specially produced to offer a highly-balanced blend of rigidity and flexibility that suits it to any surface. Rear rigidity is further enhanced by fastening the rear stiffener to the carbon-fiber battery stiffener, while big bore aeration dampers cushion the 4-wheel double wishbone suspension. Aluminum gearbox can be fitted with ball or gear diff units to further adapt the chassis to the surface.
【 Featured Components 】
●*TRF211XM Resin Lower Deck
●*Resin Rear Stiffener
●*Carbon Battery Stiffener (2.0mm thick)
●*Carbon Battery Plate (2.5mm thick)
●*Carbon Rear Damper Stay (4.0mm thick)
●*Brass Suspension Mount Rear F
●*Aluminum Battery Stoppers
●Aluminum Gearbox (choice of ball and gear diff units)
●Big Bore Dampers (Front/Rear)
●Drive Shafts w/Axle Rings
●Cooling Pressure Plates
●Lightweight Polycarbonate Body & Rear Wing
*denotes parts designed specifically for the TRF211XM chassis.
【 Specifications 】
●Chassis Length: 402mm, Width: 236mm (when fitted with separately sold wings and wheels/tires)
●Wheelbase: 285mm
●Resin Lower Deck
●Rear-Mounted Motor, Rear-Wheel Drive
●Gear Differential Unit or Ball Differential Gear
●3-Piece Steering Tie Rod
●4-Wheel Independent Double Wishbone Suspension
●Big Bore Aeration Dampers
●Gear Ratio = 8.56:1 (8.56 - 9.34 ratios possible using separately sold gears) ●Includes Body & Rear Wing
●Requires Motor and Electronic Speed Controller (Sold Separately)
【 Separately Required Items 】
●Type 540 Motor (excluding standard Type 540, 540-J, Sport-Tuned and Torque-Tuned motors)
●Tires (Recommended: Items 54185, 54186)
●Wheels (Recommended: Item 51414 (Front), Item 51321 (Rear))
●2-channel R/C system with ESC
●Batteries for transmitter
●Battery Pack and Charger
※Compatible with standard type battery pack when using with low-profile servo.