The most dominant IFMAR electric off-road racing machine charges into the new season with key running changes!!
26 years after the Ultima’s first race victory, Team Kyosho International’s Jared Tebo (America) drives the Ultima RB6 to dominate the IFMAR Electric Off Road Car Championship held in California in September 2013 with TQ and championship victory. The world’s most formidable racing machine has now been modified to deliver superior performance on high-grip running surfaces. In addition to the key advantages of the previous model (No.30068) such as high-rigidity 7075-T6 duralumin main chassis, adjustable battery mounting position for changes to weight distribution, choice of midship or rear motor mounting systems, Big Bore oil shocks for excellent surface tracing, the new model features the selection of rear wing, rear suspension arms & shock springs to suit the midship motor mount setup. These changes realize improved durability and broader setting options for stability on high grip surfaces including artificial grass, carpet and hard-packed dirt. The new RB6 is fully loaded and designed for racers ready to challenge serious competition or upgrade for the next big racing event.
●Based on the 2012 Ultima RB6 (No.30068), this model has been specifically modified for midship motor mount configuration.
●Design allows both midship and rear mounting of the motor.
●Features tungsten diff balls.
●Uses one-piece steel front wheel shafts.
●Battery mounting position can be transferred between front and rear when using separate or short type Li-Po batteries.
●Transmission incorporates reinforced idler gear to increase strength and performance.
●Clamp screw aluminum hex wheel hubs provide secure traction and precise rotation on the rear.
●New larger capacity slipper clutch is compatible with high power motors.
●Gun metallic anodized aluminum parts produce a formidable finish.
Includes X-GEAR ball diff grease and high graphite grease.
< Required for Operation >
●2-channel, 1-servo, 1-ESC R/C System
●Motor
●Battery for chassis
●Tires
●Tire inners
●Battery charger
●Pinion gears
●Paint for body
●Batteries for transmitter
●Tools
< Chassis Technical Data >
・Length: 395mm
・Width: 249mm
・Height: 140mm
・Wheelbase: 285mm
・Tread (F/R): 221mm/201mm
・Tire(F/R): sold separately
・Gear Ratio: spur 76T/pinion gear sold separately
・Weight: 1,620g (approx.)
・Motor: sold separately
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
26 years after the Ultima’s first race victory, Team Kyosho International’s Jared Tebo (America) drives the Ultima RB6 to dominate the IFMAR Electric Off Road Car Championship held in California in September 2013 with TQ and championship victory. The world’s most formidable racing machine has now been modified to deliver superior performance on high-grip running surfaces. In addition to the key advantages of the previous model (No.30068) such as high-rigidity 7075-T6 duralumin main chassis, adjustable battery mounting position for changes to weight distribution, choice of midship or rear motor mounting systems, Big Bore oil shocks for excellent surface tracing, the new model features the selection of rear wing, rear suspension arms & shock springs to suit the midship motor mount setup. These changes realize improved durability and broader setting options for stability on high grip surfaces including artificial grass, carpet and hard-packed dirt. The new RB6 is fully loaded and designed for racers ready to challenge serious competition or upgrade for the next big racing event.
●Based on the 2012 Ultima RB6 (No.30068), this model has been specifically modified for midship motor mount configuration.
●Design allows both midship and rear mounting of the motor.
●Features tungsten diff balls.
●Uses one-piece steel front wheel shafts.
●Battery mounting position can be transferred between front and rear when using separate or short type Li-Po batteries.
●Transmission incorporates reinforced idler gear to increase strength and performance.
●Clamp screw aluminum hex wheel hubs provide secure traction and precise rotation on the rear.
●New larger capacity slipper clutch is compatible with high power motors.
●Gun metallic anodized aluminum parts produce a formidable finish.
Includes X-GEAR ball diff grease and high graphite grease.
< Required for Operation >
●2-channel, 1-servo, 1-ESC R/C System
●Motor
●Battery for chassis
●Tires
●Tire inners
●Battery charger
●Pinion gears
●Paint for body
●Batteries for transmitter
●Tools
< Chassis Technical Data >
・Length: 395mm
・Width: 249mm
・Height: 140mm
・Wheelbase: 285mm
・Tread (F/R): 221mm/201mm
・Tire(F/R): sold separately
・Gear Ratio: spur 76T/pinion gear sold separately
・Weight: 1,620g (approx.)
・Motor: sold separately