SUV, Subaru Style!
This is a R/C model assembly kit of the XV, a car Subaru introduced to the crossover SUV (Sports Utility Vehicle) market in September 2012. The polycarbonate body accurately reproduces the car's stylish form, including the distinctive indentations on the bonnet and the raised area that stretches from the nose to the tail. It also faithfully replicates the SUV-style fenders. The unique wheel design is depicted using stickers, and the model features racing radial tires with realistic tread patterns. The flexible front motor belt-driven XV-01 chassis allows the driver to take the XV for a spin both on- and off-road!
【 Rally-Ready XV-01 Chassis 】
The XV-01 chassis offers exciting R/C driving action on both tarmac and gravel surfaces. It features a front-motor, belt-driven 4WD layout with the gearboxes, drive belt, battery, and R/C unit areas protected by covers against dirt and debris. Holes in the bottom of the chassis further help remove any debris which manages to get onboard to ensure unhindered off-road performance. In addition, detachable wheel well liners help prevent mud and gravel intrusion. Gear differential units enable customization with different viscosities of differential oils.
【 Specifications 】
●Length: 430mm, Width: 187mm, Height: 146mm
●Wheelbase: 257mm
●Tire Width/Diameter: Front & Rear 27/67mm
●Monocoque Chassis Frame
●Belt-Driven 4WD
●F/R Gear Differential Units
●3-Piece Steering Tie-Rod
●4-Wheel Double Wishbone Suspension
●CVA Shock Units
●Gear Ratio=8.04:1 (When used with kit-standard 68T spur and 22T pinion gears) ●Full Ball Bearings
●Type 540 Motor
●Requires an electronic speed controller (sold separately)
【 Separately Required Items 】
●2-channel R/C system with ESC
●R6/AA/UM3 batteries for transmitter
●Battery Pack & Charger
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
This is a R/C model assembly kit of the XV, a car Subaru introduced to the crossover SUV (Sports Utility Vehicle) market in September 2012. The polycarbonate body accurately reproduces the car's stylish form, including the distinctive indentations on the bonnet and the raised area that stretches from the nose to the tail. It also faithfully replicates the SUV-style fenders. The unique wheel design is depicted using stickers, and the model features racing radial tires with realistic tread patterns. The flexible front motor belt-driven XV-01 chassis allows the driver to take the XV for a spin both on- and off-road!
【 Rally-Ready XV-01 Chassis 】
The XV-01 chassis offers exciting R/C driving action on both tarmac and gravel surfaces. It features a front-motor, belt-driven 4WD layout with the gearboxes, drive belt, battery, and R/C unit areas protected by covers against dirt and debris. Holes in the bottom of the chassis further help remove any debris which manages to get onboard to ensure unhindered off-road performance. In addition, detachable wheel well liners help prevent mud and gravel intrusion. Gear differential units enable customization with different viscosities of differential oils.
【 Specifications 】
●Length: 430mm, Width: 187mm, Height: 146mm
●Wheelbase: 257mm
●Tire Width/Diameter: Front & Rear 27/67mm
●Monocoque Chassis Frame
●Belt-Driven 4WD
●F/R Gear Differential Units
●3-Piece Steering Tie-Rod
●4-Wheel Double Wishbone Suspension
●CVA Shock Units
●Gear Ratio=8.04:1 (When used with kit-standard 68T spur and 22T pinion gears) ●Full Ball Bearings
●Type 540 Motor
●Requires an electronic speed controller (sold separately)
【 Separately Required Items 】
●2-channel R/C system with ESC
●R6/AA/UM3 batteries for transmitter
●Battery Pack & Charger