A smooth operator
This is an R/C model assembly kit of the Ferrari 458 Challenge. It is an evolution of the 458 Italia (which was released in 2009) made solely for the single-series racing program. The polycarbonate body captures the flowing, low and wide form of the 458 Challenge, including the smooth curves of the front/rear fenders. Separately-sold headlights and taillights can be installed inside the included light cases. It runs on the shaft driven 4WD TT-02 chassis and features silver-colored mesh wheels with racing slick tires.
Adaptable TT-02 Chassis offers balanced shaft driven 4WD
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms for ease of assembly plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Specifications
●Length: 441mm, Width: 191mm, Height: 114mm
●Wheelbase: 257mm
●Tire Width/Diameter: 27/67mm
●Bathtub-type Frame
●Shaft Driven 4WD
●Front/Rear 4-Bevel Resin Differentials
●3-Piece Steering Tie-Rod
●4-Wheel Double Wishbone Suspension
●Front/Rear Friction Dampers
●Gear Ratio: 8.27:1 (9 further ratios possible with use of separately-sold pinion)
●Type 540 Motor
●Electronic Speed Controller is sold separately.
Separately required items
●2-Channel R/C Unit with ESC
●Battery Pack & Charger
●R6/AA/UM3 batteries for transmitter
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
This is an R/C model assembly kit of the Ferrari 458 Challenge. It is an evolution of the 458 Italia (which was released in 2009) made solely for the single-series racing program. The polycarbonate body captures the flowing, low and wide form of the 458 Challenge, including the smooth curves of the front/rear fenders. Separately-sold headlights and taillights can be installed inside the included light cases. It runs on the shaft driven 4WD TT-02 chassis and features silver-colored mesh wheels with racing slick tires.
Adaptable TT-02 Chassis offers balanced shaft driven 4WD
The shaft driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to offer excellent stability. In addition, it features identical left and right suspension arms for ease of assembly plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports.
Specifications
●Length: 441mm, Width: 191mm, Height: 114mm
●Wheelbase: 257mm
●Tire Width/Diameter: 27/67mm
●Bathtub-type Frame
●Shaft Driven 4WD
●Front/Rear 4-Bevel Resin Differentials
●3-Piece Steering Tie-Rod
●4-Wheel Double Wishbone Suspension
●Front/Rear Friction Dampers
●Gear Ratio: 8.27:1 (9 further ratios possible with use of separately-sold pinion)
●Type 540 Motor
●Electronic Speed Controller is sold separately.
Separately required items
●2-Channel R/C Unit with ESC
●Battery Pack & Charger
●R6/AA/UM3 batteries for transmitter