The Famous “Early Bronco”
This is a 1/10 scale R/C assembly kit of the Ford Bronco which is called “Early Bronco” and is greatly popular as a cross-country vehicle in the U.S. The subject of this R/C car is the 1973 wagon model which has a white rear cover. The distinctive body style which features raised front hood sides has been realistically reproduced with polycarbonate, and separately molded metal plated parts which depict front grille, light covers, and side mirrors add great scale realism. The CR-01 chassis features 4-link rigid suspension with oil dampers and shaft drive 4WD drivetrain with lockable differentials. The model comes equipped with beadlock wheels and the Cliff Crawler Tires which feature tread pattern on the sidewalls to provide maximum grip in rock crawling environments.
【 About the Ford Bronco 】
American 4WD vehicles produced prior to 1966 were viewed as large, crude machines, but the Ford Bronco which was released that year broke the mold with its compact design and created a dynasty. It was offered in three body types: the open-top roadster, the “sport utility” half cab, and the wagon. The chassis featured a drivetrain from the Ford F100 pick-up that matched the new frame and suspension. In particular, the front suspension was equipped with coil springs to provide both a comfortable ride and superb off-road capability. The first generation "Early Broncos" were produced until 1977 and remain extremely popular as cross-country and rock-climbing vehicles even today.
【 Specifications 】
●Length: 435mm
●Width: 263mm
●Height: 262mm
●Weight: 2300g
●Wheelbase: 288mm
●Tread (Front, Rear): 208mm
●Tire Width/Diameter (Front, Rear): 57/125mm
●Chassis: Ladder Frame with Aluminum Side Channels and Resin Cross Members ●Drivetrain: Shaft-Driven 4WD
●Diff Gear: 3-Bevel Diff (standard: locked setting)
●Planetary Gearbox
●Suspension: (Front/Rear) 4-Link Rigid
●Front and Rear CVA Oil Dampers
●Gear Ratio: 1:40.5
●Electronic Speed Controller (separately required)
●RS540 Type Motor
【 Separately Required Items 】
●2-Channel R/C unit with ESC
●Battery pack and charger
●8xR6/AA/UM3 batteries for transmitter
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
This is a 1/10 scale R/C assembly kit of the Ford Bronco which is called “Early Bronco” and is greatly popular as a cross-country vehicle in the U.S. The subject of this R/C car is the 1973 wagon model which has a white rear cover. The distinctive body style which features raised front hood sides has been realistically reproduced with polycarbonate, and separately molded metal plated parts which depict front grille, light covers, and side mirrors add great scale realism. The CR-01 chassis features 4-link rigid suspension with oil dampers and shaft drive 4WD drivetrain with lockable differentials. The model comes equipped with beadlock wheels and the Cliff Crawler Tires which feature tread pattern on the sidewalls to provide maximum grip in rock crawling environments.
【 About the Ford Bronco 】
American 4WD vehicles produced prior to 1966 were viewed as large, crude machines, but the Ford Bronco which was released that year broke the mold with its compact design and created a dynasty. It was offered in three body types: the open-top roadster, the “sport utility” half cab, and the wagon. The chassis featured a drivetrain from the Ford F100 pick-up that matched the new frame and suspension. In particular, the front suspension was equipped with coil springs to provide both a comfortable ride and superb off-road capability. The first generation "Early Broncos" were produced until 1977 and remain extremely popular as cross-country and rock-climbing vehicles even today.
【 Specifications 】
●Length: 435mm
●Width: 263mm
●Height: 262mm
●Weight: 2300g
●Wheelbase: 288mm
●Tread (Front, Rear): 208mm
●Tire Width/Diameter (Front, Rear): 57/125mm
●Chassis: Ladder Frame with Aluminum Side Channels and Resin Cross Members ●Drivetrain: Shaft-Driven 4WD
●Diff Gear: 3-Bevel Diff (standard: locked setting)
●Planetary Gearbox
●Suspension: (Front/Rear) 4-Link Rigid
●Front and Rear CVA Oil Dampers
●Gear Ratio: 1:40.5
●Electronic Speed Controller (separately required)
●RS540 Type Motor
【 Separately Required Items 】
●2-Channel R/C unit with ESC
●Battery pack and charger
●8xR6/AA/UM3 batteries for transmitter