One Agressive Machine
2009 saw 12 domestic and international car makers fiercely contend for the Japanese Super GT championship. One GT300 class entrant was the Corolla Axio apr GT which now comes reproduced as a 1/10 R/C assembly kit. The highly distinctive aggressive features of the Corolla such as its low bonnet, bulging front fenders, roof, rear fender air intakes etc, have all been accurately reproduced with durable polycarbonate. In addition, separately molded resin side mirrors and rear wing, and polycarbonate rear fender fins provide the body with scale realism. The 4WD 2-belt driven TA05 ver.II chassis features an inboard front suspension layout for high performance driving. Even at R/C circuit, this machine will catch everyone's attention.
【 Further Evolved Race-Spec Chassis, TA05 ver.II 】
The chassis width has been reduced for greater ground clearance when the chassis rolls. Thanks to the position of the integrated motor mount, the position of the battery pack has been moved forward, resulting in optimum balance and enhanced handling. The drivetrain features front and rear 37T ball differentials and an 18T center pulley. The four wheel double wishbone suspension system features an inboard front suspension layout with short reversible suspension arms and uprights which have 1050 ball bearings. In addition, the separate suspension mounts help to achieve easier maintenance and setting changes.
●Length: 435mm, Width: 191mm, Height: 117mm
●Wheelbase: 257mm
●Tread (Front & Rear): 165mm
●RS540 Motor included
●Horizontally placed motor equal length 2-belt driven 4WD
●Front and Rear Ball Differential
●3-piece steering tie-rod
●Front and Rear Double Wishbone Suspension
●Front and Rear CVA Oil Damper Super Mini
●Gear Ratio=7.19 :1
●Tire Width/Diameter (Front and Rear): 24mm/64mm
●Requires Electronic Speed Controller
【 Separately required items 】
●2-Channel R/C Unit with ESC
●Battery Pack & Charger
●R6/AA/UM3 batteries for transmitter
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
2009 saw 12 domestic and international car makers fiercely contend for the Japanese Super GT championship. One GT300 class entrant was the Corolla Axio apr GT which now comes reproduced as a 1/10 R/C assembly kit. The highly distinctive aggressive features of the Corolla such as its low bonnet, bulging front fenders, roof, rear fender air intakes etc, have all been accurately reproduced with durable polycarbonate. In addition, separately molded resin side mirrors and rear wing, and polycarbonate rear fender fins provide the body with scale realism. The 4WD 2-belt driven TA05 ver.II chassis features an inboard front suspension layout for high performance driving. Even at R/C circuit, this machine will catch everyone's attention.
【 Further Evolved Race-Spec Chassis, TA05 ver.II 】
The chassis width has been reduced for greater ground clearance when the chassis rolls. Thanks to the position of the integrated motor mount, the position of the battery pack has been moved forward, resulting in optimum balance and enhanced handling. The drivetrain features front and rear 37T ball differentials and an 18T center pulley. The four wheel double wishbone suspension system features an inboard front suspension layout with short reversible suspension arms and uprights which have 1050 ball bearings. In addition, the separate suspension mounts help to achieve easier maintenance and setting changes.
●Length: 435mm, Width: 191mm, Height: 117mm
●Wheelbase: 257mm
●Tread (Front & Rear): 165mm
●RS540 Motor included
●Horizontally placed motor equal length 2-belt driven 4WD
●Front and Rear Ball Differential
●3-piece steering tie-rod
●Front and Rear Double Wishbone Suspension
●Front and Rear CVA Oil Damper Super Mini
●Gear Ratio=7.19 :1
●Tire Width/Diameter (Front and Rear): 24mm/64mm
●Requires Electronic Speed Controller
【 Separately required items 】
●2-Channel R/C Unit with ESC
●Battery Pack & Charger
●R6/AA/UM3 batteries for transmitter