Built for the Track
This is a 1/10 scale R/C assembly kit of the Ferrari 599XX, an extreme circuit-only machine incorporating a number of technologies taken from Ferrari's racing experience. The stylish long-nose, short-deck form of the 599XX including the rear diffuser has been accurately reproduced by the polycarbonate body. The C-pillar winglets, rear wing, canards as well as light cases are also reproduced with polycarbonate parts. This exceptional machine is mounted on the TA06 chassis which features front belt-driven, rear gear-driven Dual Drive 4WD system.
Dual-Drive 4WD System
The 4WD TA06 chassis features an excellent balance and its layout positions the motor and battery pack along the centerline of the chassis. It is powered via a distinctive Dual-Drive System with belt-driven front and gear-driven rear wheels. 4-wheel double wishbone suspension features a refined Inboard Front Suspension setup with short reversible suspension arms. The front and rear gearboxes are both equipped with gear differential units to provide superb traction and acceleration. In addition, it comes equipped with 24mm width racing slick tires mounted on mesh wheels.
Specifications
●Length: 448mm, Width: 190mm, Height: 121mm
●Wheelbase: 257mm
●Tread (F/R): 165mm
●Monocoque Frame Chassis
●Front Belt-Driven and Rear Gear-Driven 4WD
●F/R Gear Differential Units
●3-Piece Steering Tie-Rod
●4-Wheel Double Wishbone Suspension
●CVA Shock Units
●Gear Ratio=6.41:1 (when used with 68T spur and 23T pinion gears)
●Full Ball Bearings
●Motor not included
●Requires an electronic speed controller (sold separately)
Separately Required Items
●2-Channel R/C Units with ESC
●Battery Pack & Charger
●R6/AA/UM3 batteries for transmitter
●Type 540 motor
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
This is a 1/10 scale R/C assembly kit of the Ferrari 599XX, an extreme circuit-only machine incorporating a number of technologies taken from Ferrari's racing experience. The stylish long-nose, short-deck form of the 599XX including the rear diffuser has been accurately reproduced by the polycarbonate body. The C-pillar winglets, rear wing, canards as well as light cases are also reproduced with polycarbonate parts. This exceptional machine is mounted on the TA06 chassis which features front belt-driven, rear gear-driven Dual Drive 4WD system.
Dual-Drive 4WD System
The 4WD TA06 chassis features an excellent balance and its layout positions the motor and battery pack along the centerline of the chassis. It is powered via a distinctive Dual-Drive System with belt-driven front and gear-driven rear wheels. 4-wheel double wishbone suspension features a refined Inboard Front Suspension setup with short reversible suspension arms. The front and rear gearboxes are both equipped with gear differential units to provide superb traction and acceleration. In addition, it comes equipped with 24mm width racing slick tires mounted on mesh wheels.
Specifications
●Length: 448mm, Width: 190mm, Height: 121mm
●Wheelbase: 257mm
●Tread (F/R): 165mm
●Monocoque Frame Chassis
●Front Belt-Driven and Rear Gear-Driven 4WD
●F/R Gear Differential Units
●3-Piece Steering Tie-Rod
●4-Wheel Double Wishbone Suspension
●CVA Shock Units
●Gear Ratio=6.41:1 (when used with 68T spur and 23T pinion gears)
●Full Ball Bearings
●Motor not included
●Requires an electronic speed controller (sold separately)
Separately Required Items
●2-Channel R/C Units with ESC
●Battery Pack & Charger
●R6/AA/UM3 batteries for transmitter
●Type 540 motor