An Oldie, but a Goodie!
Take a trip back in time with this tractor-inspired R/C model assembly kit! The durable polycarbonate body is pre-painted in red and really captures the form of a 1930s-era European tractor, with a stretched bonnet, rear driver's seat and big overarching fenders on the rear wheels. A finished driver figure is included in the kit to round off the look! The model runs on the rear wheel drive WR-02G chassis, with a sturdy monocoque frame and centrally-positioned motor plus 97mm (front) and 130mm diameter (rear) wheels. It also includes 4-wheel double wishbone suspension and sealed gearbox containing the differential. Slam on the throttle for wheels-in-the air driving action, try extravagant spin turns and enjoy driving this fun model!
【 Fun wheelie action with the rear wheel drive WR-02G! 】
The rear wheel drive WR-02G chassis was made for rough riding! Shielded by side frames and held tightly in place by the monocoque frame, the fully-sealed gearbox is well-protected from impact. Power is provided to the rear wheels by a centrally-positioned motor, and transmitted via the differential in the gearbox. The location of the battery pack is key: its longitudinally-placed position high in the rear ensures that when the model accelerates, the front naturally rises in a wheelie. At that point, the wheelie bar on the model's rear stops the model from toppling over, and in doing so maintains a great wheelie! Steering servos are placed along the center of the chassis, and they combine with the 2-piece tie rod for precision steering. The suspension is of the tough 4-wheel double-wishbone variety.
【 2.4GHz Transmitter Included 】
In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only. Transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation.
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
Take a trip back in time with this tractor-inspired R/C model assembly kit! The durable polycarbonate body is pre-painted in red and really captures the form of a 1930s-era European tractor, with a stretched bonnet, rear driver's seat and big overarching fenders on the rear wheels. A finished driver figure is included in the kit to round off the look! The model runs on the rear wheel drive WR-02G chassis, with a sturdy monocoque frame and centrally-positioned motor plus 97mm (front) and 130mm diameter (rear) wheels. It also includes 4-wheel double wishbone suspension and sealed gearbox containing the differential. Slam on the throttle for wheels-in-the air driving action, try extravagant spin turns and enjoy driving this fun model!
【 Fun wheelie action with the rear wheel drive WR-02G! 】
The rear wheel drive WR-02G chassis was made for rough riding! Shielded by side frames and held tightly in place by the monocoque frame, the fully-sealed gearbox is well-protected from impact. Power is provided to the rear wheels by a centrally-positioned motor, and transmitted via the differential in the gearbox. The location of the battery pack is key: its longitudinally-placed position high in the rear ensures that when the model accelerates, the front naturally rises in a wheelie. At that point, the wheelie bar on the model's rear stops the model from toppling over, and in doing so maintains a great wheelie! Steering servos are placed along the center of the chassis, and they combine with the 2-piece tie rod for precision steering. The suspension is of the tough 4-wheel double-wishbone variety.
【 2.4GHz Transmitter Included 】
In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only. Transmitter features detachable grip covers to match your hand size as well as a throttle trigger cover to increase the size of the throttle trigger for easier operation.
【 Specifications 】
●1/10 Scale
●Length: 345mm、Width: 253mm、Height: 235mm
●Wheelbase: 170mm
●Tread: 189mm (Front), 195mm (Rear)
●Tire Width/Diameter: 57/97mm (Front), 58/130mm (Rear)
●Resin Monocoque Frame
●Rear Wheel 2WD
●4-Wheel Double Wishbone Suspension
●Front/Rear Friction Dampers
●2-Piece Steering Tie Rod
●3-Bevel Differentials
●Gear Ratio: 18.3:1
●Type 540 Motor
●Electronic Speed Controller (Forward/Reverse Type)