Enjoy Drifting the Popular GT-R (R32)
Announced in May 1989, the electronically controlled 4WD Nissan Skyline GT-R (R32) came released with an inline 6-cylinder engine which pumped out a cool 280hp. After the release of the R32, Nissan released R33 & R34 models, but the popularity of the R32 never waned. This is a 1/10 assembly kit R/C car of the very popular Nissan Skyline GT-R (R32). The polycarbonate shell realistically captures the GT-R's form as seen with the prolific wide front & rear fenders and bumper air-intakes. Moreover, high brightness always-on LED lights depicting headlights (white) and taillights (red) are included to provide a realistic experience. Combined with the TT-01D Drift Spec chassis, this machine offers you thrilling drift action.
【 R/C Units, Battery Pack, and Charger 】
R/C units are installed onto the pre-assembled chassis, and a wheel-trigger type transmitter, battery pack & charger are included to allow you to enjoy R/C driving instantly. (Battery pack and charger are included for Japan only.)
【 Specially Tuned Drift Chassis 】
The TT-01D Drift Spec chassis is evolved from the bathtub frame type shaft driven TT-01 chassis which mounts the R/C unit and battery close to the ground for optimum balance and low center of gravity. It is equipped with durable resin 24mm wide Super Driftech Tires that ensure superior drift control and long-lasting performance. In addition, the CVA oil dampers with short springs are mounted onto the 4-wheel double wishbone suspension. Full ball bearings are included for enhanced efficiency, and an aluminum motor heat sink helps cool the Sport-Tuned Motor during intense drift runs.
【 Specifications 】
●Length: 452mm, Width: 184mm, Height: 135mm
●Wheelbase: 257mm
●Drift Tires (Front and Rear) Width/Diameter: 26/63mm
●Bathtub Type Frame Chassis
●Longitudinally Placed Motor Shaft-Driven Full-Time 4WD
●Front and Rear 3-Bevel Differentials
●3-Piece Steering Linkage
●4-Wheel Double Wishbone Suspension
●C.V.A. Oil Damper Super Mini
●Gear Ratio=8.35:1
●RS540 Sport-Tuned Motor Included
●Full Ball Bearings Included
●Forward/Reverse Electronic Speed Controller Included. ※Requires 8xR6/AA/UM3 Batteries for Transmitter (sold separately)
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
Announced in May 1989, the electronically controlled 4WD Nissan Skyline GT-R (R32) came released with an inline 6-cylinder engine which pumped out a cool 280hp. After the release of the R32, Nissan released R33 & R34 models, but the popularity of the R32 never waned. This is a 1/10 assembly kit R/C car of the very popular Nissan Skyline GT-R (R32). The polycarbonate shell realistically captures the GT-R's form as seen with the prolific wide front & rear fenders and bumper air-intakes. Moreover, high brightness always-on LED lights depicting headlights (white) and taillights (red) are included to provide a realistic experience. Combined with the TT-01D Drift Spec chassis, this machine offers you thrilling drift action.
【 R/C Units, Battery Pack, and Charger 】
R/C units are installed onto the pre-assembled chassis, and a wheel-trigger type transmitter, battery pack & charger are included to allow you to enjoy R/C driving instantly. (Battery pack and charger are included for Japan only.)
【 Specially Tuned Drift Chassis 】
The TT-01D Drift Spec chassis is evolved from the bathtub frame type shaft driven TT-01 chassis which mounts the R/C unit and battery close to the ground for optimum balance and low center of gravity. It is equipped with durable resin 24mm wide Super Driftech Tires that ensure superior drift control and long-lasting performance. In addition, the CVA oil dampers with short springs are mounted onto the 4-wheel double wishbone suspension. Full ball bearings are included for enhanced efficiency, and an aluminum motor heat sink helps cool the Sport-Tuned Motor during intense drift runs.
【 Specifications 】
●Length: 452mm, Width: 184mm, Height: 135mm
●Wheelbase: 257mm
●Drift Tires (Front and Rear) Width/Diameter: 26/63mm
●Bathtub Type Frame Chassis
●Longitudinally Placed Motor Shaft-Driven Full-Time 4WD
●Front and Rear 3-Bevel Differentials
●3-Piece Steering Linkage
●4-Wheel Double Wishbone Suspension
●C.V.A. Oil Damper Super Mini
●Gear Ratio=8.35:1
●RS540 Sport-Tuned Motor Included
●Full Ball Bearings Included
●Forward/Reverse Electronic Speed Controller Included. ※Requires 8xR6/AA/UM3 Batteries for Transmitter (sold separately)