Sensational Group C Racer
In 1982, the World Endurance Championship introduced the new Group C class, which was initially dominated by the Porsche 956. In 1984, Toyota entered the Tom's 84C to challenge Porsche for top honors in this category and this is a 1/12 scale R/C model of that historic car. The polycarbonate body faithfully reproduces the aerodynamic, sleek form of the 84C and car numbers and various sponsor logos can be depicted with included stickers. A driver figure is also included to enhance realism. All of this is mounted on the Direct-Drive 2WD RM-01 chassis to provide thrilling racing action.
【 An Exciting Development in 1/12 Scale 】
This 1/12 scale chassis features a 2.5mm thick black-colored FRP lower deck and a height-adjustable resin gear case with Type 380 motor. Pivot-Ball Link Rear (PBLR) suspension system features a center pivot ball, a pitch damper to temper chassis pitch movement, and a roll damper and side links to control chassis roll. The chassis' Direct-Drive setup features a ball diff inside the spur gear while high-grip sponge tires provide plenty of traction.
【 Specifications 】
●Length: 358mm
●Width: 170mm
●Height: 86mm
●Wheelbase: 201mm
●Tread: 137mm (Front), 132mm (Rear)
●Tire Width/Diameter: 24/49mm (Front), 35/51mm (Rear)
●2.5mm thick black-colored FRP Lower Deck
●Horizontally-Mounted Motor, Rear Direct-Drive 2WD
●Ball Differential
●Symmetrical Steering Tie-Rods
●Front Kingpin Coil Spring & Pivot Ball Link Rear Suspension
●Gear Ratio=4.50:1 (when used with 14T pinion and 63T spur gears)
●Type 380 Motor included
●Requires an Electronic Speed Controller (sold separately)
【 Separately Required Items 】
●2-Channel R/C Unit with ESC
●Batteries for transmitter
●Battery Pack & Charger
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
In 1982, the World Endurance Championship introduced the new Group C class, which was initially dominated by the Porsche 956. In 1984, Toyota entered the Tom's 84C to challenge Porsche for top honors in this category and this is a 1/12 scale R/C model of that historic car. The polycarbonate body faithfully reproduces the aerodynamic, sleek form of the 84C and car numbers and various sponsor logos can be depicted with included stickers. A driver figure is also included to enhance realism. All of this is mounted on the Direct-Drive 2WD RM-01 chassis to provide thrilling racing action.
【 An Exciting Development in 1/12 Scale 】
This 1/12 scale chassis features a 2.5mm thick black-colored FRP lower deck and a height-adjustable resin gear case with Type 380 motor. Pivot-Ball Link Rear (PBLR) suspension system features a center pivot ball, a pitch damper to temper chassis pitch movement, and a roll damper and side links to control chassis roll. The chassis' Direct-Drive setup features a ball diff inside the spur gear while high-grip sponge tires provide plenty of traction.
【 Specifications 】
●Length: 358mm
●Width: 170mm
●Height: 86mm
●Wheelbase: 201mm
●Tread: 137mm (Front), 132mm (Rear)
●Tire Width/Diameter: 24/49mm (Front), 35/51mm (Rear)
●2.5mm thick black-colored FRP Lower Deck
●Horizontally-Mounted Motor, Rear Direct-Drive 2WD
●Ball Differential
●Symmetrical Steering Tie-Rods
●Front Kingpin Coil Spring & Pivot Ball Link Rear Suspension
●Gear Ratio=4.50:1 (when used with 14T pinion and 63T spur gears)
●Type 380 Motor included
●Requires an Electronic Speed Controller (sold separately)
【 Separately Required Items 】
●2-Channel R/C Unit with ESC
●Batteries for transmitter
●Battery Pack & Charger