Picking Up the Pace
Toyota's Land Cruiser needs little introduction; it was a pioneering 4WD vehicle in Japan, and would become one of the most recognizable cars of its type in the world. Its history stretches back to the 1950s, and includes the 40 series, which was produced from 1960-1984 and can still be seen in service today. This R/C model recreates the iconic off-roader with a polycarbonate pick-up truck style body and resin driver figure. It is mounted on the new gear-driven 4WD GF-01 chassis unit, using huge tires to hustle across poor terrain.
【 GF-01: Square Set-up, Excellent Performance 】
This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. It utilizes a 'square' setup with near-identical tread and wheelbase lengths. Sealed gearbox is integrated into the frame and protects from dust and debris, while the built-in front and rear differential gears provide smooth cornering. This is reinforced by 4-wheel double wishbone suspension and friction dampers plus a 2-piece tie rod steering setup with the servo on the left for excellent response. Furthermore, it has 5-spoke metal-plated wheels fitted with big 110mm diameter tires, in addition to a rear support bar with roller to prevent the model from flipping.。
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
Toyota's Land Cruiser needs little introduction; it was a pioneering 4WD vehicle in Japan, and would become one of the most recognizable cars of its type in the world. Its history stretches back to the 1950s, and includes the 40 series, which was produced from 1960-1984 and can still be seen in service today. This R/C model recreates the iconic off-roader with a polycarbonate pick-up truck style body and resin driver figure. It is mounted on the new gear-driven 4WD GF-01 chassis unit, using huge tires to hustle across poor terrain.
【 GF-01: Square Set-up, Excellent Performance 】
This gear-driven 4WD chassis is based around a lightweight and tough monocoque frame, with power provided by the centrally-positioned motor. It utilizes a 'square' setup with near-identical tread and wheelbase lengths. Sealed gearbox is integrated into the frame and protects from dust and debris, while the built-in front and rear differential gears provide smooth cornering. This is reinforced by 4-wheel double wishbone suspension and friction dampers plus a 2-piece tie rod steering setup with the servo on the left for excellent response. Furthermore, it has 5-spoke metal-plated wheels fitted with big 110mm diameter tires, in addition to a rear support bar with roller to prevent the model from flipping.。
【 Specifications 】
●Length: 333mm
●Width: 244mm
●Height:242mm
●Wheelbase: 174mm
●Tread (Front & Rear): 194mm
●Tire Width/Diameter: 50mm/110mm
●Monocoque Frame
●Gear-Driven 4WD
●3-Bevel Type Differentials
●2-Piece Steering Tie-Rod
●Front & Rear Double Wishbone Suspension
●Gear Ratio = 18.03:1
●Type 540 Motor
●Requires Electronic Speed Controller (separately sold)
【 Separately Required Items 】
●2-Channel R/C Unit with ESC
●Battery Pack & Charger
●R6/AA/UM3 batteries for transmitter