An Oldie, but a Goodie!
Take a trip back in time with this tractor-inspired R/C model assembly kit! The durable polycarbonate body really captures the form of a 1930s-era European tractor, with a stretched bonnet, rear driver's seat and big overarching fenders on the rear wheels. A realistic driver figure is included in the kit to round off the look! The model runs on the rear wheel-drive WR-02G chassis, with a sturdy monocoque frame and centrally-positioned motor plus 97mm (front) and 130mm diameter (rear) wheels. It also includes 4-wheel double wishbone suspension and sealed gearbox containing the differential. Slam on the throttle for wheels-in-the air driving action, try extravagant spin turns and enjoy driving this fun model!
【 Fun wheelie action with the rear-wheel drive WR-02G! 】
The rear wheel drive WR-02G chassis was made for rough riding! Shielded by side frames and held tightly in place by the monocoque frame, the fully-sealed gearbox is well-protected from impact. Power is provided to the rear wheels by a centrally-positioned motor, and transmitted via the differential in the gearbox. The location of the battery pack is key: its longitudinally-placed position high in the rear ensures that when the model accelerates, the front naturally rises in a wheelie. At that point, the wheelie bar on the model's rear stops the model from toppling over, and in doing so maintains a great wheelie! Steering servos are placed along the center of the chassis, and they combine with the 2-piece tie rod for precision steering. The suspension is of the tough 4-wheel double-wishbone variety.
【 Specifications 】
●Length: 345mm、Width: 253mm、Height: 235mm
●Weight: 1310g (not including R/C equipment or battery pack)
●Wheelbase: 170mm
●Tread: 189mm (Front), 195mm (Rear)
●Tire Width/Diameter: 57/97mm (Front), 58/130mm (Rear)
●Resin Monocoque Frame
●Rear-Wheel 2WD
●4-Wheel Double Wishbone Suspension
●Front/Rear Friction Dampers
●2-Piece Steering Tie Rod
●3-Bevel Differentials
●Gear Ratio: 18.3:1
●Type 540 Motor
●Requires an electronic speed controller (sold separately)
【 Separately Required Items 】
●2-Channel R/C System w/ESC
●R6/AA/UM3 batteries for transmitter
●Battery Pack & Charger
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
Take a trip back in time with this tractor-inspired R/C model assembly kit! The durable polycarbonate body really captures the form of a 1930s-era European tractor, with a stretched bonnet, rear driver's seat and big overarching fenders on the rear wheels. A realistic driver figure is included in the kit to round off the look! The model runs on the rear wheel-drive WR-02G chassis, with a sturdy monocoque frame and centrally-positioned motor plus 97mm (front) and 130mm diameter (rear) wheels. It also includes 4-wheel double wishbone suspension and sealed gearbox containing the differential. Slam on the throttle for wheels-in-the air driving action, try extravagant spin turns and enjoy driving this fun model!
【 Fun wheelie action with the rear-wheel drive WR-02G! 】
The rear wheel drive WR-02G chassis was made for rough riding! Shielded by side frames and held tightly in place by the monocoque frame, the fully-sealed gearbox is well-protected from impact. Power is provided to the rear wheels by a centrally-positioned motor, and transmitted via the differential in the gearbox. The location of the battery pack is key: its longitudinally-placed position high in the rear ensures that when the model accelerates, the front naturally rises in a wheelie. At that point, the wheelie bar on the model's rear stops the model from toppling over, and in doing so maintains a great wheelie! Steering servos are placed along the center of the chassis, and they combine with the 2-piece tie rod for precision steering. The suspension is of the tough 4-wheel double-wishbone variety.
【 Specifications 】
●Length: 345mm、Width: 253mm、Height: 235mm
●Weight: 1310g (not including R/C equipment or battery pack)
●Wheelbase: 170mm
●Tread: 189mm (Front), 195mm (Rear)
●Tire Width/Diameter: 57/97mm (Front), 58/130mm (Rear)
●Resin Monocoque Frame
●Rear-Wheel 2WD
●4-Wheel Double Wishbone Suspension
●Front/Rear Friction Dampers
●2-Piece Steering Tie Rod
●3-Bevel Differentials
●Gear Ratio: 18.3:1
●Type 540 Motor
●Requires an electronic speed controller (sold separately)
【 Separately Required Items 】
●2-Channel R/C System w/ESC
●R6/AA/UM3 batteries for transmitter
●Battery Pack & Charger