In the Thick of Things
This is an R/C assembly kit recreating the Ferrari F2012 which was a central character in the dramatic 2012 Formula One season, leading the Championship from the middle of the season and staying in contention until the final race. The model faithfully recreates the F2012's distinctive form, including the upward-flowing side pontoons, complex front wing and the stepped nose which was designed to conform to regulations. Side mirrors, bargeboards and vertical fins are reproduced as separate parts. Moreover, separated side pontoon parts are also included for a highly realistic finish.
【 Direct Drive 2WD Chassis 】
The F104 chassis features a double-deck frame equipped with 2.0mm thick upper and 3.2mm thick lower FRP plates and has the battery placed in a longitudinal position to allow for a slim body design. Suspension features a simple and proven 3-point system. Front upper arms are connected to uprights with ball connectors, and the front ground clearance can be easily adjusted by altering the spacer positions. Rear suspension features the combination of friction plates and a coil spring. The highly efficient direct drive 2WD features the motor pinion directly connected to the spur gear which has a built-in ball differential. Realistic semi-pneumatic rubber tires are equipped with inner sponges for superb traction.
【 Specifications 】
●Length: 419mm, Width: 180mm, Height: 99mm
●Weight: 790g (not including R/C mechanism and battery pack)
●Wheelbase: 270mm
●Tread: 150mm (Front), 145mm (Rear)
●Tire Width/Diameter: 30/64 (Front), 35/64 (Rear)
●FRP Double Deck Frame
●Horizontally-Mounted Motor Rear Direct Drive 2WD
●Ball Differential
●Symmetrical Steering Tie-Rod
●Suspension: Kingpin Coil Spring (Front), T-Bar Rigid (Rear)
●Gear Ratio 4.16:1 (When used with 25T Pinion and 104T Spur Gears
●Type 540 Motor
●Requires Electronic Speed Controller (sold separately)
【 Separately Required Items 】
●2-channel R/C system with ESC
●Batteries for transmitter
●Battery pack and charger
Bargain
Airplane
Helicopter
Parts for Sky
Electric Car
Engine Car
Product for Car
Radio Set
RF Module
Receiver + Servo Set
Receiver
Servo
Gyro
Parts for Radio
Engine
Muffler
Fuel
Charger・Discharger
Starter&Booster
Simulater
Power Source
Gauge&Tool
ToolBox・Rotor/ Radio Case
Frequent use
Carbon Material
Paint
Others
Parts for Real Plane & Heli
This is an R/C assembly kit recreating the Ferrari F2012 which was a central character in the dramatic 2012 Formula One season, leading the Championship from the middle of the season and staying in contention until the final race. The model faithfully recreates the F2012's distinctive form, including the upward-flowing side pontoons, complex front wing and the stepped nose which was designed to conform to regulations. Side mirrors, bargeboards and vertical fins are reproduced as separate parts. Moreover, separated side pontoon parts are also included for a highly realistic finish.
【 Direct Drive 2WD Chassis 】
The F104 chassis features a double-deck frame equipped with 2.0mm thick upper and 3.2mm thick lower FRP plates and has the battery placed in a longitudinal position to allow for a slim body design. Suspension features a simple and proven 3-point system. Front upper arms are connected to uprights with ball connectors, and the front ground clearance can be easily adjusted by altering the spacer positions. Rear suspension features the combination of friction plates and a coil spring. The highly efficient direct drive 2WD features the motor pinion directly connected to the spur gear which has a built-in ball differential. Realistic semi-pneumatic rubber tires are equipped with inner sponges for superb traction.
【 Specifications 】
●Length: 419mm, Width: 180mm, Height: 99mm
●Weight: 790g (not including R/C mechanism and battery pack)
●Wheelbase: 270mm
●Tread: 150mm (Front), 145mm (Rear)
●Tire Width/Diameter: 30/64 (Front), 35/64 (Rear)
●FRP Double Deck Frame
●Horizontally-Mounted Motor Rear Direct Drive 2WD
●Ball Differential
●Symmetrical Steering Tie-Rod
●Suspension: Kingpin Coil Spring (Front), T-Bar Rigid (Rear)
●Gear Ratio 4.16:1 (When used with 25T Pinion and 104T Spur Gears
●Type 540 Motor
●Requires Electronic Speed Controller (sold separately)
【 Separately Required Items 】
●2-channel R/C system with ESC
●Batteries for transmitter
●Battery pack and charger